Four Components Polyurethane Casting Machine

Machine Description

Machine Model : CPU30J-5C

Excellent Features

INTRODUCTION

the majority MDI based systems) or polyurethane systems composed by two prepolymers and a chain extender (like the majority of TDI based systems). The machine can work practically all the polyurethane systems, including microcellular elastomer foams.

Microphase-separated Morphology in Polyurethane Elastomers

OUTPUT AND PERFORMANCES

The output of the machine can be custom-tailored in order to satisfy any specific request. The pump speed is directly managed and controlled by a computer and can be set between 15 and 250 Rpm. On the main component circuits it is possible to install a pump of a size between 0,30 cc/rev and 15 cc/rev, while the auxiliary circuits can accept a pump of a size between 0,03 cc/rev and 0,20 cc/rev.

According to the size of the circuit and the pump installed, the output can be between 150 g/min. and 6 000 g/min. The machine can be equipped with up to six additional injectors, installed directly

into the mixing chamber, through which colors, additives and/or catalysts can be dosed. All these auxiliary circuits are equipped with pressure regulator and recirculation loop. 

Technical parameters：

1. Output : 3~10Kg/min

2. Three-phase AC 400V + zero line + (ground) frequency: 50HZ total power 35KW wire 10 square line

3. Air source: The outer diameter of the inlet pipe is 8mm and the pressure is 0.6~0.8MPa.

4. Three components mixing ratio: A: B= 100: 5 ~ 20

Raw Chemical Components

Hot Tags: four components polyurethane casting machine, China, suppliers, manufacturers, factory, wholesale, buy, cheap, bulk, customized, low price, in stock, free sample, made in China, PU Injection Machine, Polyurethane Elastomer Testing Machine, PU Elastomer Middle Temperature Casting Machine, PU dispensing Machine