PU Foaming Machine

Machine Model : PU20J-1C

Excellent Features:

(2) the use of high-quality alloy aluminum long spiral mixing head, lightweight and durable, mixed evenly, easy to clean.

(3) pouring head with cantilevered hanging, stirring motor 1.5KW 2P

(4) the motor by frequency control, the mixing head in the mixing chamber in the high-speed rotation, A, B liquid from the respective valve to switch into pouring state, through the throttling into the mixing chamber, switch to return state, the control valve Back to the respective tank.

(5) pouring from the ground height: 1100mm - 800mm

Technical parameters

By the air compressor 0.6 ~ 0.8Mpa compressed air, in the pneumatic components of the oil-water separator and pressure regulator to stabilize the pressure in the 0.4 ~ 0.6Mpa, the two pieces of oil mist, so that the compressed air oil to the head to push the pouring → return solenoid valve to ensure synchronization.

Divided into three ways:

The first way: after the regulator and the oil mist to the mixing device (two four-way solenoid valve) to control the liquid to switch the cylinder (lower cylinder) and cleaning (on the cylinder).

Second Road: controlled by two two-way solenoid valve to the mixing device for the use of gas after casting.

Third way: from the valve to the cleaning tank for the delivery of cleaning fluid used.

Seven, heating system:

The system ueses a tubular heater in the heating jacket ,heating the medium (water or heat transfer oil) to the required temperature. In the general situation: A, B component stock controls between the 20 ~ 25 ℃; electric heater by the temperature display adjustment instrument control, when the liquid When the temperature is heated to the rated value, it will automatically stop heating. When the temperature of the stock solution is too high, it can be cooled by the chiller to cool the cooling unit. The cooling capacity is 3000Kcal / h, and the temperature of the raw material is constant at the required temperature. The temperature error should be ≤ ± 1 ℃ , Temperature control unit is mainly used to control the temperature of the two raw materials, made into an integrated structure.

Quality assurance:

A. The seller's warranty period for normal use of the equipment is one year, except for wearing parts. The warranty period is calculated from the date of loading the equipment. During the warranty period, the seller shall provide free maintenance and replacement of parts for equipment damage under normal operating conditions.

B. During the use of the equipment, the buyer shall strictly follow the instructions and operating procedures provided by the seller. In case of damage caused by illegal use, the buyer shall bear the economic loss.

Hot Tags: pu foaming machine, China, suppliers, manufacturers, factory, wholesale, buy, cheap, bulk, customized, low price, in stock, free sample, made in China, Polyurethane Plate Vulcanizing Machine, Pu Machine, Two Colours Precision Sole Forming Machine, polyurethane foam, Manual Console, Electrothermal Oven