Polyurethane Ribbon Cast casting machine System for Roller Manufacturing without the Mold tools

Latest state-of-the art polyurethane casting machine for industrial rollers

2. How to Prepare and Preheat Coating Rolls

(1) Rolls should be cleaned and checked for foreign matter and oil on the roll surface before applying the adhesive.

(2) Apply 1 coat of glue and then apply another coat when dry.

(3) Once the glue is applied, attach the edge extensions to the roll.

(4) After preheating, the rolls are coated when the iron core temperature drops to (60~70℃) after checking the surface

Pre-bake in a 110℃ oven for 5-6 hours.

Ribbon Coating Job Standards

3H/110℃(3 days or more at room temperature)

(1) Unlike the existing TDI-Prepolymer, the polythene raw material is MDI-Prepolymer.

(2) In particular, MDI is considerably more sensitive and reactive to moisture than TDI, so careful handling is required.

(3) Even when adding preheated raw materials to the tank, the raw material inlet is not opened and the inlet is sealed.

1. How to Work with Raw Materials

1-1 Preparing Raw Materials

(1) Pre-heat the polythene substrate and curing agent drum in an electric oven.

(2) The heating temperature is 45℃ for 10 hours preheating.

(3) It's a good idea to preheat the hardener drum by rotating it.

(3) It should be aged at room temperature for at least a week to achieve optimal properties.

(2) It usually takes about a week to cure at room temperature.

If this is not possible, tilt it slightly so that the hot air can be distributed evenly.

(4) Since the curing agent contains various amines, it should be stirred thoroughly after

into the tank to ensure even dispersion.

1-2 Raw Material Properties

Shape Conditions

A/B=100/(107.5),(103.1),(82.7),(71),(62.2)

10

1,500

Use a spring hose to vacuum into the tank.

(4) Add the hardener in the same way as in step 3.

(5) This is to avoid mixing raw materials with atmospheric moisture when inputting raw materials.

(6) The above working conditions must be strictly observed in order to produce uniform

and stable products by departing from the conventional way of handling raw materials.

(1) Polythane materials cure at room temperature, but can be hot air cured for f

Hot Tags: mdi ribbon flow cast machine, China, suppliers, manufacturers, factory, wholesale, buy, cheap, bulk, customized, low price, in stock, free sample, made in China, Fully Automatic Filter Gasket Pouring Machine, Polyurethane Wheel Casting Machine, Automatic Filter Gasket Casting Machine, Continuous Flow Centrifuge, Polyurethane PU Injection Machine, MOCA Chemical Feeder